IF Fullclean Foam Strong is a strong alkaline active cleaning agent Whiteh a very long bonding time and particularly good cleaning capacity.

The foam is characterized by:

• Very long bonding time, up to 2 hours after application, also on plastic walls! This allows the active components to act longer on the contamination and at the same time keep the surface moist.
• High content of complexing agent.
• The combination of high alkalinity and high chelating power gives improved degreasing in areas Whiteh hard water.
• It offers excellent protein and fat solubility.
• The active foam is a dynamic foam! Penetrates very well into the dirt and keeps the dirt in solution through the emulsifiers and dispersers.
• Economical to use.
• Enormous savings on cleaning time and therefore less manure.

Contains: NaOH, KOH, complexing agents, humidifiers, foaming agents, emulsifiers and dispersers.

Instructions for use: Apply by means of IF Applicator at 1-2%. Allow the foam to soak in and rinse for 1-2 hours.

Packaging: 25 and 220 kg.

Why foam? The detergent adheres to the surface to be cleaned by means of foam technology. Lye Whitehout foaming agent runs directly from the surface, so there is no effective cleaning. By allowing foam to adhere longer, the foam bubbles act on the dirt. After a while, the foam bubbles burst and take down the dissolved dirt. Then foam bubbles again attach themselves to the dirt that has not yet been loosened up, after a while these foam bubbles also burst and take the dissolved dirt down again. By repeating the above, a very effective cleaning is achieved.

Dynamic foam: A good cleaning and degreasing is achieved by: a longer bonding time of the dynamic foaming agent sufficient active substances (NaOH, complexing agents, emulsifiers and dispersers) a good application technique (IF Applicator: correct dosing, perfect foaming agent,) on dry walls and apply surfaces everywhere.

Ahead of innovation!