Huwa-San TR-50

Huwa-San TR-50 is a high-quality, biodegradable disinfectant that ensures thorough and safe water treatment. Thanks to its patented stabilization technology, Huwa-San remains active throughout the entire water system and efficiently removes and prevents biofilm. It helps control persistent pathogens such as Legionella, Pseudomonas and E. Coli.

• Effective against bacteria, fungi, and viruses
• Removes and prevents biofilm build-up
• Improves feed conversion
• Proven effective against Legionella
• Biodegradable
• No odor, color or taste – improves water quality
• Thanks to the stabilizer, it retains its disinfecting power for a long time
• Stable and active throughout the entire water supply system
• Compatible with IF dosing systems
• Immediate insight into concentration and performance

With Huwa-San TR-50, you ensure the best water quality, allowing your animals to perform at their best.

Holds PT02, PT03 and PT04 authorizations. PT05 for France.

Usage dosage:

General:

• First thoroughly clean surfaces, equipment, material and pipes.
• Rinse off any cleaning agent used Whiteh clean water.
• Remove excess water.

1. Room disinfection in the vapor phase. This disinfection may only be performed by professionals who have undergone room disinfection training and are certified. The disinfection must be carried out according to the protocol "Room disinfection Whiteh Huwa-San TR50 in the vapor phase" that is made available by the supplier of the agent. This protocol specifies the required atomizing measuring equipment. Prior to disinfection, damp areas should be dried and cupboard doors and drawers opened. For proper operation, the total nebulization time (time that> 100 ppm peroxide is present in the air at> 65% relative humidity) must be at least 60 minutes, at a temperature> 20ºC. When the RH becomes> 95%, sWhitech off the fogging equipment (fogger) and start again if the RH value is <90%.
2. Surfaces, equipment and materials that come into contact Whiteh food, drink and raw materials: Spray Whiteh 10% solution (bactericide) or 15% solution (fungicide) at 20 ° C. Use enough liquid that the surfaces remain wet during the exposure time. Allow to act for at least 5 minutes (bactericide) or 15 minutes (fungicide). After treatment, rinse thoroughly Whiteh clean tap water. Bactericide 4%, fungicide 5%, virucide 3% for 60 min minutes.
3. Disinfection against bacteria, yeasts and fungi in installations that come into contact Whiteh water Fill the installation Whiteh 6% solution. Let it work for at least 30 minutes. Vent the pipe system during the disinfection. In the case of use in drinking water systems, rinse the system vigorously after the exposure time so that loosened contamination (biofilm) is removed. Flush the pipe system Whiteh clean tap water until no more hydrogen peroxide is measured in the flushing water.
4. a. Disinfection against bacteria, yeasts and fungi in pipe systems: fill system Whiteh 6% solution. Let it work for at least 30 minutes. Vent the pipe system during the disinfection. Rinse the pipe system Whiteh clean tap water until no more hydrogen peroxide is measured in the rinse water. 4. b. Disinfection against bacteria, yeasts and fungi on material and equipment: Immerse material or equipment to be treated in 10% solution. Let it work for at least 15 minutes. If in contact Whiteh food after disinfection, rinse Whiteh clean water.
5. Disinfection against bacteria, yeasts, viruses and amoebas in the livestock sector. Disinfection of surfaces, floors and walls. Spray Whiteh dilute solution. Preferably dry treated surfaces and floors. Rinsing is necessary. Bactericide 3%, fungicide 5% and virucide 3% for 60 min. Or amoebicide 2% for 10 min. Poultry sector: virucide (avian influenza): 2% for 60 min at 20 ° C.

Precautionary measures:

• Wear protective gloves / protective clothing / eye protection / face protection.
• When spraying the product, the user must always wear gloves, impervious coveralls and eye and face protection.
• When nebulizing:
• Always wear gloves when making dilutions Whiteh hydrogen peroxide.
• Always wear a gas mask when entering a room where more than 10 ppm hydrogen peroxide vapor is still present.
• The room can only be released for use again when the measured peroxide concentration is <1 ppm.

Autorisation number: BE-REG-00501.

Packaging: 25, 240 and 1200 kg.

Because the Huwa-San products have been extensively tested and developed, they meet the most recent standards for disinfection:

• Bactericide: EN1276, EN13697, EN1656, EN13727, EN14561, EN14349, EN16437, EN13626, AFNOR NF T 72-281
• Mycobactericide: EN14348, AFNOR NF T 72-281, EN14204
• Fungicide: EN1650, EN13697, EN1657, EN13624, EN14562, EN16438, AFNOR NF T 72-281
• Virucide: EN EN14476, AFNOR NF T 72-281, EN14675
• Sporocide: EN13704, AFNOR NF T 72-281 ***

Huwa-San TR-50 meets all these standards. Contact us for more information about a specific test.

This product is a biocide classified in the closed circuit. Guidelines regarding use, storage and transport can be found on the safety data sheet. Use biocides safely. Before use, read the label and product information.