Bootcleaner stainless steel

The IF boot cleaner is a robust device that makes it possible to thoroughly clean boots under low pressure. A strong frame made of stainless steel in combination with nylon brushes makes it possible to properly clean and disinfect the boots.

Properties:

• Stainless steel frame.
• The boot cleaner is equipped with 5 brushes: one at the bottom and 2 on each side.
• Equipped with a venturi system that makes it possible to suck up cleaning and/or disinfectant. Automatically sucked up and distributed by the 5 nylon brushes.

Usage:

• First remove the coarse dirt on the grid for the nylon brushes.
• Clean the boot by moving back and forth through the nylon brushes. The water in combination with the friction removes the dirt that sticks to the boots.
• Disinfect the boots afterwards by manually closing the opening above the venturi system. As soon as the opening is closed, disinfectant is sucked up and applied to the boot.

Dimensions: 90 X 25 X 55 cm

Tip: Use an oxidative disinfectant. This disinfectant works very quickly, so that the stable can be entered with disinfected boots. Examples of oxidative disinfectants: Chloorstabil, Halamid, Huwa-San TR50, ... Use biocides safely. Before use, read the label and product information!!