DT Foam

DT Foam is an environmentally friendly, powerful cleaning agent with highly active foam on soiled surfaces in order to achieve optimal wetting and degreasing.

Composition: sodium hydroxide, potassium hydroxide, nonionic surfactant of vegetal origin, chelating agent (activity in hard water), foaming agent, anti-corrosion agent.

Application: 

Foam or spray: 

• Dilute DT Foam® to 1% or 2% in clean water, depending on the degree of soiling.
• Apply the solution to the surfaces with a pressure sprayer (3 to 10 bar), or a foam gun (150 bars - 15 to 20 litres/minute) at 100 to 200 ml per m².
• Allow the product to act for 15 to 30 minutes.
• Rinse the surfaces with clean water and remove dirt with a high pressure jet (150 bars - 20 to 30 litres/minute).

Immersion:

• Use DT Foam® at 2%. 
• Soak the smaller items in the solution for 15 to 30 minimum minutes.
• At the end of the treatment, rinse with clean water before using disinfectant
• .

Professional use only. Consult the safety data sheet and the label before each use.

Control Ecocert SA: F-32600. This product can be used in organic farming according to European regulations EC 834/2007 in the food industry.