IF Fullclean Foam is a strong alkaline active cleaning agent Whiteh a very long bonding time.
The foam is characterized by:
Contains: NaOH, complexing agents, humidifiers, foaming agents, emulsifiers and dispersants.
Instructions for use: Apply by means of IF Applicator to 2%. Leave foam for 1-2 hours and rinse.
Packaging: can of 224 kg.
Why foam? The detergent adheres to the surface to be cleaned by means of foam technology. Lye Whitehout foaming agent runs directly from the surface, so there is no effective cleaning. By attaching foam longer, the foam bubbles work on the dirt. After a while, the foam bubbles burst and they take the dissolved dirt down. Foam bubbles then start to settle on the dirt that has not yet been soaked away. After some time these foam bubbles also burst and they take the dissolved dirt down again. By a repetition of the foregoing, a very effective cleaning is obtained.
Dynamic foam: Good cleaning and degreasing is achieved by: a longer bonding time of the dynamic foaming agent sufficient active substances (NaOH, complexing agents, emulsifiers and dispersers) a good application technique (IF Applicator: correct dosage, perfect foaming agent,) use on dry walls and apply surfaces everywhere.