Terugspoelfilter met dubbele spintechnologie

Backwash filter with dual spin technology

PRODUCT DESCRIPTION:

This filter ensures a continuous supply of filtered drinking water in water systems. It traps foreign particles such as rust particles and grains of sand and complies with the applicable DIN/DVGW standards.

The filter element is also cleaned quickly and thoroughly during the rinse cycle using filtered water, with minimal water consumption. The indicator ring clearly shows when a manual rinse is required. For added convenience, an automatic rinse unit with a bayonet fitting can be added at a later date.

The large filter surface area ensures a long service life. The impact-resistant, transparent filter cup makes it easy to check the level of contamination. The filter element is fully replaceable and the unit is very easy to use.

DUAL SPIN TECHNOLOGY:

The filter element is divided into two sections. During filtration, water flows only through the large lower section from the outside in; the small upper section does not come into contact with the unfiltered water. When the ball valve is opened for backwashing, the entire filter element is compressed until the water supply to the lower section is cut off. At the same time, the flow of water through the upper section is opened. The water required for cleaning the filter flows through the upper filter area, the rotating wheel and then through the lower filter area from the inside out, with the flushing taking place using filtered water. The upper section is also cleaned by the jet from the wheel. When the ball valve is closed, the filter cartridge automatically returns to its working position.

UITVOERING :